Hasselblad H4D-50MS Camera Body driver for Windows 7 - Hasselblad H4D-50MS Camera Body driver from Hasse

Hasselblad H4D-50MS Camera Body 2.3.1/16.0.7

Hasselblad H4D-50MS Camera Body driver from Hasselblad for OS Independent

Hasselblad H4D-50MS Camera Body driver from Hasselblad for OS Independent

Publisher review for Hasselblad H4D-50MS Camera Body 2.3.1/16.0.7:

Before install Hasselblad H4D-50MS Camera Body 2.3.1/16.0.7you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Hasselblad H4D-50MS Camera Body . We recommend to always use most recent version of a driver.

This package contains firmware version CB130308.hbf for the listed products: H4D, H3DII, H3D, H2D series.Fixes:- Support for the new 2900 mAh Li-ion battery grip (3043356).
Installation steps:1. Remove lens and viewfinder and connect the camera to the host computer using a FireWire cable.
2. Make sure the computer is powered from the mains supply or has a fresh battery.
3. Start Phocus and when the camera is connected, as indicated by an active camera icon in the top left part of the screen, select “Update Firmware...” from the “File“ menu. Browse to the location where the update file was saved and follow the instructions on screen.
4. The update procedure will take a few minutes to finish. Depending on camera model, different options will be available during the update process.
Important notice:- Manual updating of firmware is available in the Phocus software, from version 1.1 Mac and 1.0.2 Windows. 

Operating system:
OS Independent